| español - English - Italiano - deutch |
) The
Testing Bench has been designed to carry out the maintenance and running-in
of motors, both at no load and mounted or under load, for model cars,
slot, plafit and mini-z. It can also be used to obtain exact measurements
for such important parameters as voltage, consumption, revolutions per
minute and meters per second.It is also equipped with an adjustable power supply unit, from 1 to 20 V., a tyre grinder and a jack input to test slot controls. The Testing Bench can communicate with any PC through the port COM (RS-232). It includes a software program (only if the corresponding guarantee card has been filled in and handed over). It also has 100 memories in each section (unlimited, if the software for PC is used) to record the data gathered in the slot car and motor functions, thus enabling you to obtain voltage, consumption, r.p.m and m.p.s measurements. |
) slot |
) plafit |
) mini-z |
 Diameter of wheel |
 Slot car |
 memories |
 Motor |
) Maintenance and running-in |
) track consumption measurement |
) motor speed measurement under load |
) motor speed measurement at no load |
) tyre grinding |
) slot control tester |
Technical characteristics
| POWERSUPPLY | 24 V/DC |
| CONSUMPTION | 320 mA |
| ADJUSTABLE OUTPUT | 1-20 V/DC |
| ADJUSTMENT POTENTIOMETER (VOLTAGE) | 10 tums |
| MÁXIMUM INTENSITY | 1 Amp. |
| SHORT-CIRCUIT PROTECTION | electronic |
| OUTPUT VOLTAGE TOLERANCE | 5 % |
| RESOLUTION mA | +/- 3 % |
| RESOLUTI0N RPM | 0,2 % |
| SPEED RANGE RPM | 30-60.000 rpm |
| LIGHTED ALPHANLIMERICAL DISPLAY | 2 x 20 |
| NUMBER OF MEMORIES | 200 |
| CONNECTOR Sub-D9 (RS-232) | Computer Interface |
| WEIGHT | 1,6 Kg |
| DIMENSIONS | 42 x 250 x 180 mm |